Light Genie is a wireless system with a 2.4Ghz transmitter and 5 Zones (12 outputs) receiver. Each output can control 2 incandescent bulbs or 4 or more LEDs. With a total of 12 outputs, Light Genie can control an average of 24 light bulbs or 48 or more LEDs. The Genie receiver is broken down into 5 zones. Each zone can independently turn on lights, as well as dim or brighten them. Each zone offers more than 20 different lighting effects including sequential flashing, strobe lighting, fast flicker to produce a fire effect, double strobe, random flash and many others. You can hook up a three bulb traffic light to a zone and another zone can operate a perpendicular traffic light that will automatically cycle in the opposite direction so they can control a 4 way corner. Each Genie offers a 90-foot operating range, works flawlessly in tunnels and penetrates walls without loss of signal. What's more, multiple Genies can be used without any worries of cross interference.

DCC Operation
Light Genie™ will operate like most standard NMRA decoders, but without speed control functions. The decoder can be controlled using the many of the function buttons on your DCC controller.
Light Genie™ like most DCC decoders, is preset with a default address of #3. Light Genie™ uses short addressing (1-127). Programming can be done on the "program track" and/or "main track". Once you have given your Light Genie™ decoder an address, use the accessory function to turn on/off light, change lighting effects, change brightness/dimness, and light effect rate.

DCC Operation
Light Genie™ will operate like most standard NMRA decoders, but without speed control functions. The decoder can be controlled using the many of the function buttons on your DCC controller.

Light Genie™ like most DCC decoders, is preset with a default address of #3. Light Genie™ uses short addressing (1-127). Programming can be done on the "program track" and/or "main track". Once you have given your Light Genie™ decoder an address, use the accessory function to turn on/off light, change lighting effects, change brightness/dimness, and light effect rate.

Function	Operation
F1	Zone 1 On/Off
F0	Zone 2 On/Off
F3	Zone 3 On/Off
F4	Zone 4 On/Off
F5	Zone 5 On/Off
F6	Master Power On/Off
F7	Dim Last Controlled Light Zone
F8	Brighten Last Controlled Light Zone

Below is the CV Programming Chart for Light Genie™

CV1	DESCRIPTION	RANGE	DEFAULT
CV1	Short Address	1-127	3
CV19	Advanced Consist Address	0-127	0
CV51	Zone 1 Light Effect	0-20	0
CV52	Zone 2 Light Effect	0-20	0
CV53	Zone 3 Light Effect	0-20	0
CV54	Zone 4 Light Effect	0-20	0
CV55	Zone 5 Light Effect	0-20	0
CV61	Zone 1 Brightness	0-200	200
CV62	Zone 2 Brightness	0-200	200
CV63	Zone 3 Brightness	0-200	200
CV64	Zone 4 Brightness	0-200	200
CV65	Zone 5 Brightness	0-200	200
CV71	Zone 1 Light Rate	0-32	15
CV72	Zone 2 Light Rate	0-32	15
CV73	Zone 3 Light Rate	0-32	15
CV74	Zone 4 Light Rate	0-32	15
CV75	Zone 5 Light Rate	0-32	15
CV125	Programming to "1" will restore some CV's to factory settings	---	0

Consisting Light Genie™
Light Genie™ may be consisted with other Light Genies™, in the same way that you would consist locomotive decoders. This will allow you to operate multiple Light Genies™ as one unit; while still allowing each Light Genie™ to function as independent decoder with its own address. Consisting is programmed through CV19 using addresses (0-127).

LIGHT GENIE™ FAQs

LIGHT GENIE™ for Model Railroaders

LIGHT GENIE™ for Sci-fi and other plastic kit modelers

• Use LEDs without inline resistors
• Operate with batteries or an external power supply
• Genie’s palm-size, wireless transmitter with a range of 90’, eliminates the need for cumbersome, manual controls at the base of your model.
• At a show, an unlimited number of Light Genies can be used simultaneously
• What effects can I control?
• Light Genie gives you 12 light outputs and can control over more than 20 different lighting effects, including brightness and dimming, flickering, flashing, strobe, alternating flashing lights, sequential lighting, beacon, fire-effect flickering and more.

• Add lighting effects at an economical, not an outrageous price
• Engine lights
• Navigation lights
• Interior Lights
• Exterior ID lights
• Sequential, alternating lights for UFOs
• Outfit a Star Ship with Flickering, Strobe, or Flashing Lights
• Use multiple light effects in a haunted house
• Create a creature with flashing lights for eyes
• Use the fire-flickering effect for fire breathing aliens

• Headlights
• Turn Signals
• Emergency Vehicle Flashers
• Emergency vehicle strobe lighting
• Reversing Lights
• Truck Running Lights
• Truck Flashers
• Trunk & Hood Lights
• High Beams
• Dashboard & Other Interior Lighting w/Dimming Control
• Blinkers/4-way Flashers
• Three signal Traffic Lights Automatically Cycling-Green-to-yellow-to- red

• Sequential Flashing Runway Lights
• Blinking Wing Lights
• Rotating Beacon
• Taxiing and Landing Lights
• Cockpit and Instrument Panel Lighting with Dimming
• Strobe Light Under the Belly
• Flashing Lights
• Flickering-fire Effect for Jet Turbine Exhaust
• Interior and navigation lights for ships